Gegevens van gebruiker angel
| Naam: | angel |
| Aangemeld op: | 14 feb 2016 |
| Status | Lid |
| E-mail: | niet openbaar |
| Website: | |
| Bedrijf: | |
| Adres: | |
| PC Plaats: | |
| Land: | |
| Telefoon: | |
| Opmerkingen: |
Inloggen met mijn account
Reacties van angel
| Datum | Artikel | Reactie |
| 17 maa 2016 09:13:57 |
Arduino wattmeter | Hello, is it possible that if the diodes are broken due to an overvoltage, will the arduino be shorted immediately? |
| 14 maa 2016 02:55:38 |
Arduino wattmeter | For example, my load is a 100W lightbulb. After calibration of the meter, the voltage and current measurements are exact. Then I need to recalibrate the meter a ... |
| 10 maa 2016 04:19:58 |
Arduino wattmeter | What may be the problem if I calibrate the meter every time I change the load? Thank you |
| 22 feb 2016 12:04:52 |
Arduino wattmeter | yes, the calibration values are both positive. We only commented out the code for the buttons, since we only wanted to display the Vrms, Irms, Preal and Energy ... |
| 19 feb 2016 08:26:56 |
Arduino wattmeter | It now reads from A0-2. Thanks. I encountered a problem with the Real Power, the display on the LCD is negative. When I checked the voltage and current, they ar ... |
| 14 feb 2016 16:31:02 |
Arduino wattmeter | I wish to change the input channel for the voltage, current and COM to the analog pins 1, 2, 3 of the nano respectively (instead of 4, 5, 6). I tried changing A ... |
